How To Drain A Pool With A Garden Hose

What You Need

Draining a pool with a garden hose requires a few key pieces of equipment: a small submersible pump, a long garden hose, and a discharge location. The most important thing to remember is that the pump must be capable of handling the volume of water that needs to be removed. If the pump is too small, it may not be able to completely remove the pool's water. Furthermore, the garden hose must have a diameter wide enough to prevent water from streaming back into the pool from the drain line.

Step-by-Step Instructions

Once the necessary equipment is acquired, the draining process can begin. Here are the steps to follow for draining a pool with a garden hose:

• 1. Place the submersible pump in the deepest part of the pool near the main drain. This will ensure the most efficient removal of water.
• 2. Connect the garden hose to the pump and then run the other end of the garden hose to the discharge location.
• 3. Turn on the pump, allow it to fill with water, and begin draining.
• 4. Monitor the pump and garden hose for any issues. If the flow of water stops, make adjustments to the garden hose or pump as necessary.
• 5. After the water has been drained, carefully remove the garden hose and pump from the pool.

Considerations

When draining a pool with a garden hose, there are a few important considerations to keep in mind:

Water Discharge Restrictions

Prior to beginning the draining process, it is important to check that the discharge of water is permitted in the location where the garden hose will be connected. Some locations have restrictions on the amount of water that can be discharged, and it is important to comply with these regulations.

Timing and Amount of Water

The timing and amount of water that is removed from the pool will need to be taken into account. If too much water is removed too quickly, the pool structure may be damaged. In addition, the water should never be drained during periods of freezing weather, as this will put the pool at risk for significant damage.

Damaged Equipment

Inspect the garden hose and pump before and after use to ensure that they remain in good working order. This will help make sure that the equipment does not get damaged during the draining process.

Insights

Draining a pool with a garden hose can be a convenient and cost-effective way to remove large volumes of water from a pool. However, it is important to remember that proper equipment must be used, and water restrictions must be taken into account. By following the steps outlined in this article, and considering the important safety and legal considerations, you can safely and effectively drain a pool with a garden hose.